Using LDAP Authentication with TLS/SSL

You can control access to HAWQ with an LDAP server and, optionally, secure the connection with encryption by adding parameters to pg_hba.conf file entries.

HAWQ supports LDAP authentication with the TLS/SSL protocol to encrypt communication with an LDAP server:

  • LDAP authentication with STARTTLS and TLS protocol – STARTTLS starts with a clear text connection (no encryption) and upgrades it to a secure connection (with encryption).
  • LDAP authentication with a secure connection and TLS/SSL (LDAPS) – HAWQ uses the TLS or SSL protocol based on the protocol that is used by the LDAP server.

If no protocol is specified, HAWQ communicates with the LDAP server with a clear text connection.

To use LDAP authentication, the HAWQ master host must be configured as an LDAP client. See your LDAP documentation for information about configuring LDAP clients.

Enabing LDAP Authentication with STARTTLS and TLS

To enable STARTTLS with the TLS protocol, specify the ldaptls parameter with the value 1. The default port is 389. In this example, the authentication method parameters include the ldaptls parameter.

ldap ldapserver=ldap.example.com ldaptls=1 ldapprefix="uid=" ldapsuffix=",ou=People,dc=example,dc=com"

Specify a non-default port, with the ldapport parameter. In this example, the authentication method includes the ldaptls parameter and the ldapport parameter to specify the port 550.

ldap ldapserver=ldap.example.com ldaptls=1 ldapport=500 ldapprefix="uid=" ldapsuffix=",ou=People,dc=example,dc=com"

Enabling LDAP Authentication with a Secure Connection and TLS/SSL

To enable a secure connection with TLS/SSL, add ldaps:// as the prefix to the LDAP server name specified in the ldapserver parameter. The default port is 636.

This example ldapserver parameter specifies a secure connection and the TLS/SSL protocol for the LDAP server ldap.example.com.

ldapserver=ldaps://ldap.example.com

To specify a non-default port, add a colon (:) and the port number after the LDAP server name. This example ldapserver parameter includes the ldaps:// prefix and the non-default port 550.

ldapserver=ldaps://ldap.example.com:550

Notes

HAWQ logs an error if the following are specified in a pg_hba.conf file entry:

  • If both the ldaps:// prefix and the ldaptls=1 parameter are specified.
  • If both the ldaps:// prefix and the ldapport parameter are specified.

Enabling encrypted communication for LDAP authentication only encrypts the communication between HAWQ and the LDAP server.

Configuring Authentication with a System-wide OpenLDAP System

If you have a system-wide OpenLDAP system and logins are configured to use LDAP with TLS or SSL in the pg_hba.conf file, logins may fail with the following message:

could not start LDAP TLS session: error code '-11'

To use an existing OpenLDAP system for authentication, HAWQ must be set up to use the LDAP server’s CA certificate to validate user certificates. Follow these steps on both the master and standby hosts to configure HAWQ:

  1. Copy the base64-encoded root CA chain file from the Active Directory or LDAP server to the HAWQ master and standby master hosts. This example uses the directory /etc/pki/tls/certs.

  2. Change to the directory where you copied the CA certificate file and, as the root user, generate the hash for OpenLDAP:

    # cd /etc/pki/tls/certs
# openssl x509 -noout -hash -in <ca-certificate-file>
# ln -s <ca-certificate-file> <ca-certificate-file>.0

  3. Configure an OpenLDAP configuration file for HAWQ with the CA certificate directory and certificate file specified.

    As the root user, edit the OpenLDAP configuration file /etc/openldap/ldap.conf:

    SASL_NOCANON on
URI ldaps://ldapA.example.priv ldaps://ldapB.example.priv ldaps://ldapC.example.priv
BASE dc=example,dc=priv
TLS_CACERTDIR /etc/pki/tls/certs
TLS_CACERT /etc/pki/tls/certs/<ca-certificate-file>

    Note: For certificate validation to succeed, the hostname in the certificate must match a hostname in the URI property. Otherwise, you must also add TLS_REQCERT allow to the file.

  4. As the gpadmin user, edit /usr/local/hawq/greenplum_path.sh and add the following line.

    export LDAPCONF=/etc/openldap/ldap.conf

Examples

These are example entries from an pg_hba.conf file.

This example specifies LDAP authentication with no encryption between HAWQ and the LDAP server.

host all plainuser 0.0.0.0/0 ldap ldapserver=ldap.example.com ldapprefix="uid=" ldapsuffix=",ou=People,dc=example,dc=com"

This example specifies LDAP authentication with the STARTTLS and TLS protocol between HAWQ and the LDAP server.

host all tlsuser 0.0.0.0/0 ldap ldapserver=ldap.example.com ldaptls=1 ldapprefix="uid=" ldapsuffix=",ou=People,dc=example,dc=com"

This example specifies LDAP authentication with a secure connection and TLS/SSL protocol between HAWQ and the LDAP server.

host all ldapsuser 0.0.0.0/0 ldap ldapserver=ldaps://ldap.example.com ldapprefix="uid=" ldapsuffix=",ou=People,dc=example,dc=com"